| Parte No | Fabricante | Aplicación |
|---|
| ATF22V10CZ-15PI | Atmel | High-performance EE PLD, 15ns |
| AT45DB021-JI | Atmel | 2-Megabit 2.7-volt only serial DataFlash, 5MHz, 10mA active, 0.015mA standby |
| AT49F001N-90TI | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT24C08-10TC-1.8 | Atmel | 2-wire serial EEPROM 8K(1024 x 8) |
| AT27C010L-12PC | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,25mA max |
| AT24C02-10MI-2.7 | Atmel | 2-wire serial EEPROM 2K(256 x 8) |
| AT28C64X-25SC | Atmel | 64K(8K x 8) CMOS EPROM |
| AT49F002NT-55JC | Atmel | 2-Megabit(256K x 8) 5-volt only CMOS flash memory, 50mA active, 0.1mA standby |
| AT49BV002NT-12VI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| T2117-TAS | Atmel | Zero-voltage switch with adjustable ramp for full-wave power control, temperature regulation and power blinking switch |
| AT24C01-10TC-2.7 | Atmel | 2-wire serial EEPROM 1K(128 x 8) |
| ATV2500H-35JC | Atmel | High-density UV-erasable programmable logic device |
| AT27BV020-90CI | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT24C16-10TC-1.8 | Atmel | 2-wire serial EEPROM 16K(2048 x 8) |
| AT49BV512-12TI | Atmel | 512K (64K x 8) single 2.7-volt Battery-Voltage flash memory, 25mA active, 0.05mA standby |
| AT27C256R-70TI | Atmel | 256K (128K x 8) OTP CMOS EPROM |
| AT49BV4096-20RC | Atmel | 4-Megabit (256K x 16) 3-volt only CMOS flash memory, 25mA active, 0.05mA standby |
| AT49BV8192AT-12TI | Atmel | 8-Megabit (1M x 8 or 512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| T89C51RD2-SMSC-M | Atmel | 0 to 40 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT49F4096AT-70RI | Atmel | 4-Megabit (256K x 16) CMOS flash memory, 50mA active, 0.3mA standby |
| AT27BV020-90CC | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT49LV001N-70JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 3.0V to 3.6V |
| AT28HC64B-90JI | Atmel | 64K(8K x 8) high speed CMOS EEPROM with page write and software data protection |
| AT27BV020-15CI | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT49BV512-12VC | Atmel | 512K (64K x 8) single 2.7-volt Battery-Voltage flash memory, 25mA active, 0.05mA standby |
| AT49BV008A-12TC | Atmel | 8-Megabit (1M x 8 or 512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT27BV020-12CC | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT28C256-15SI | Atmel | 256K(32K x 8) paged CMOS EPROM |
| ATF22V10B-10SC | Atmel | High-performance EE PLD |
| AT24CS256W-10SI-1.8 | Atmel | 2-wire serial EEPROM with permanent software write protect 256K(32,768 x 8), 100kHz,twr(max) 20ms |
