| Parte No | Fabricante | Aplicación |
|---|
| T89C51RD2-SMRC-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT49BV8192T-12RC | Atmel | 8-Megabit (512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT27BV512-12JC | Atmel | 512K (64K x 8) unregulated battery-voltage high speed OTP CMOS EPROM, 8ma active current, 0.02mA standby current |
| AT48801-16QC | Atmel | 8 bit spread-spectrum microcontroller, 5V power supply |
| AT28C256-25PI | Atmel | 256K(32K x 8) paged CMOS EPROM |
| AT49LV010-12JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT49F002NT-12PI | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT49F8192T-12TI | Atmel | 8-Megabit (512K x 16) 5-volt ohly CMOS flash memory, 50mA active current, 0.3mA standby current |
| AT24C32W-10SC | Atmel | 2-wire serial EEPROM 32K(4096 x 8),400kHz |
| AT45D081-RC | Atmel | 8-Megabit 5-volt only serial DataFlash, 10MHz, 25mA active, 0.02mA standby |
| AT28C64X-25JI | Atmel | 64K(8K x 8) CMOS EPROM |
| AT93C66-10PI-2.7 | Atmel | 3-wire serial EEPROM 4K(512 x 8 or 256 x 16) |
| AT90S2343-10SC | Atmel | 8-bit microcontroller with 2K bytes of in-system programmable flash, 4.0-6.0V |
| 5962-89841 143X | Atmel | High-performance EE PLD |
| AT24C01-10TI-1.8 | Atmel | 2-wire serial EEPROM 1K(128 x 8) |
| AT49LV002N-90PI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT6005-2QI | Atmel | Coprocessor field programmable gate arrays, 5V |
| AT49BV001NT-90VC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| AT28LV256-20JC | Atmel | 256K(32K x 8) low voltage CMOS EEPROM |
| AT90LS2343-4SI | Atmel | 8-bit microcontroller with 2K bytes of in-system programmable flash, 2.7-6.0V |
| AT27LV1026-35VC | Atmel | 1-Megabit (2 x 32K x 16) 16-bit interleaved lov-voltage OTP EPROM, 30mA active, 0.1mA standby |
| AT49BV001N-12TI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 2.7V to 3.6V |
| AT49LV8192T-12RI | Atmel | 8-Megabit (512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT29C040A-12PC | Atmel | 4-Megabit(512K x 8) 5-volt only 256-byte sector CMOS flash memory |
| AT27C080-15JC | Atmel | 8-Megabit (1M x 8) UV erasable CMOS EPROM |
| AT49F001-12VC | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT6005LV-4QC | Atmel | Coprocessor field programmable gate arrays, 3.3V |
| AT27C256R-12RC | Atmel | 256K (128K x 8) OTP CMOS EPROM |
| AT80F51-20AC | Atmel | 8-Bit microcontroller with 4K bytes QuickFlash memory, 20MHz, 5V |
| AT93C46W-10SI-2.5 | Atmel | 1K (128 x 8 or 64 x 16) 3-wire serial EEPROM, 500KHz, 2.5V to 5.5V |
