| Parte No | Fabricante | Aplicación |
|---|
| AT89LV51-12JC | Atmel | 8-bit microcontroller with 4K bytes flash,2.7V to 6V |
| AT49BV002NT-12TC | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| ATF1516ASL-20QHI208 | Atmel | High performance EE-based CPDL, 83.3 MHz |
| ATF1516AS-10QHC208 | Atmel | High performance EE-based CPDL, 125 MHz |
| T89C51RD2-RDTI-M | Atmel | 0 to 40 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| T89C51RD2-3CUC-M | Atmel | 0 to 40 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT49BV008A-20TI | Atmel | 8-Megabit (1M x 8 or 512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT89C1051U-24PI | Atmel | 8-bit microcontroller with 1K bytes flash, 4.0V to 6.0V power supply |
| AT25256T2-10TI | Atmel | SPI serial EEPROM 256K (32,768 x 8),3000kHz |
| AT27C020-55PI | Atmel | 2-Megabit (256K x 8)OTP EPROM,25mA active current 0.1mA standby current |
| AT87F51-24AI | Atmel | 8-bit microcontroller with 4K bytes QuickFlash, 5V power supply |
| AT49F002T-70TI | Atmel | 2-Megabit(256K x 8) 5-volt only CMOS flash memory, 50mA active, 0.3mA standby |
| AT28HC256F-90JI | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT49F002T-90TI | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT24C256-10CC-1.8 | Atmel | 2-wire serial EEPROM 128K(16,384 x 8),100kHz |
| AT89C52-24QC | Atmel | 8-bit microcontroller with 8K bytes flash,5V |
| AT24C08N-10SI-1.8 | Atmel | 2-wire serial EEPROM 8K(1024 x 8) |
| ATF16V8B-25XI | Atmel | High-performance flash PLD |
| 5962-88726 11 3X | Atmel | High-speed UV-erasable programmable logic device,92MHz |
| AT27C512R-12PC | Atmel | 512K (64K x 8) OTP CMOS EPROM |
| AT27C040-70TI | Atmel | 4-Megabit (512K x 8)OTP EPROM |
| AT80F52-16JC | Atmel | 8-Bit microcontroller with 8K bytes QuickFlash memory, 16MHz, 5V |
| AT24C01A-10MI-1.8 | Atmel | 2-wire serial EEPROM 1K(128 x 8) |
| ATV2500BQL-25JC | Atmel | High-speed high-density UV erasable programmable logic device |
| AT49F001N-55JI | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT93C57-10PI | Atmel | 3-wire serial EEPROM 2K(256 x 8 or 128 x 16) |
| T89C51RD2-RDTC-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT25320-10PI | Atmel | SPI serial EEPROM, 32K (4096 x 8), 2100kHz, 4.5V to 5.5V |
| AT49LV4096-12RC | Atmel | 4-Megabit (256K x 16) 3-volt only CMOS flash memory, 25mA active, 0.05mA standby |
| AT25256C1-10CC | Atmel | SPI serial EEPROM 256K (32,768 x 8),3000kHz |
