| Parte No | Fabricante | Aplicación |
|---|
| MX7575TQ | MAXIMIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1/2 LSB. |
| MX7837AN | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1 |
| MAX146AMJP | MAXIMIC | +2.7 V, low-power, 8-channel, serial 12-bit ADC. INL(LSB) +-1/2. |
| MAX6503UKN015-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) -15. |
| MAX6326XR25-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.500V. Order increment 10k |
| MAX6316MUK34BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX9687EPE | MAXIMIC | Dual, ultra-fast ECL-output comparator |
| IH5048CJE | MAXIMIC | CMOS analog switch. |
| MAX3667ECJ | MAXIMIC | +3.3V, 622Mbps, SDH/SONET laser driver with automatic power control. |
| MAX6316LUK47DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX303MLP | MAXIMIC | Precision, dual, high-speed analog switch. |
| MAX218EAP | MAXIMIC | 1.8V to 4.25V - powered, true RS-232 dual transceiver. |
| MAX188CMJP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MX580KCSA | MAXIMIC | High precision +2.5V reference. Tolerance +-25mV |
| MAX4326ESA | MAXIMIC | Dual, low-cost, low-power, Rail-to-Rail I/O op amp. BW 5MHz. |
| MAX6316MUK31BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX176AEPA | MAXIMIC | Serial-output, 250 ksps 12-bit ADC with T/H and reference. Error(LSB) +-1/2. |
| DG419AK | MAXIMIC | Improved, SPDT (with one NO and one NC) analog switch |
| MX565AKCWG | MAXIMIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/4LSB |
| MAX6321HPUK44AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6315US50D1-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 5.00V. Reset timeout period(min) 1ms. |
| MAX188AEPP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX4075AFESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 1.5V/V, noninverting gain 2.5V/V, -3dB BW 180kHz. |
| MAX6321HPUK25DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| IH5341CPD | MAXIMIC | Dual RF and video switch |
| MAX6318MHUK40AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6310UK28D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.730(min),2.870(max). Nominal timeout period 1120ms. |
| MAX4291EXK-T | MAXIMIC | Single, ultra-small, single supply +1.8V to +5.5V, or dual supples +-0.9V t0 +-2.75V, micropower, Rail-to-Rail I/O op amp. |
| MAX385CPE | MAXIMIC | Precision, low-voltage analog switch. |
| MAX293EWE | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz |
