| Parte No | Fabricante | Aplicación |
|---|
| MAX236ENG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX338CSE | MAXIMIC | 8-channel, low-leakage, CMOS analog multiplexer. |
| MAX6333UR22D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version |
| MAX456C/D | MAXIMIC | 8 x 8 video crosspoint switch. |
| MAX6313UK34D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.315(min) 3.485(max).Nominal timeout period 20ms. |
| MAX1400EAI | MAXIMIC | +5V, 18-bit, low-power, multichannel, oversampling (sigma-delta) ADC |
| MAX6326XR22-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.200V. Standard version, order increment 2500 |
| MAX6377UR31-T | MAXIMIC | Ultra-low-power voltage detector, 3.1V |
| MAX1653EEE | MAXIMIC | High-efficiency, PWM, step-down DC-DC controller in 16-pin QSOP |
| MAX253MJA | MAXIMIC | Transformer driver for isolated RS-485 interface. |
| MXD1000UA500 | MAXIMIC | 5-tap silicon delay line |
| MAX3218CAP | MAXIMIC | 1.8V to 4.25V-powered, 1microA supply current RS-232 transceiver with AutoShutdown. |
| MAX552ACUB | MAXIMIC | +3V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2. |
| MAX6310UK45D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.388(min),4.613(max). Nominal timeout period 20ms. |
| MAX6318LHUK34DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX211CAI | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX500BC/D | MAXIMIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-2. |
| MAX111ACAP | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX151BENG | MAXIMIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.5 LSB. |
| MAX6307UK48D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.680(min),4.920(max).Nominal timeout period 1120ms. |
| ICL7614DC/D | MAXIMIC | Single operational amplifier, 15mV |
| MAX9687MJE | MAXIMIC | Dual, ultra-fast ECL-output comparator |
| MAX474EPA | MAXIMIC | Dual, 10MHz single-supply op amp. |
| MX7576AQ | MAXIMIC | CMOS, microprocessor-compatible, fast conversion time 10 microsec, 8-bit ADC. INL +-1 LSB. |
| MAX5173BEEE | MAXIMIC | Low-power, serial, 14-bit DAC with force/sence voltage output. Single-supply +3V operation. Full-scale output range +4.096V(Vref=+2.5V). INL(LSB) +-4. |
| MAX166ACPP | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB. |
| MAX820RCPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy +-2% |
| MAX6332UR24D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit Reset threshold(typ) 2.4V, reset timeout(min) 100ms |
| MAX4661CWE | MAXIMIC | 2.5om, quad, SWPST, CMOS analog switch (four NC switches). |
| MAX879EPA | MAXIMIC | Step-up/step-down DC-DC converters |
