| Parte No | Fabricante | Aplicación |
|---|
| MAX6310UK29D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.857(min),3.000(max). Nominal timeout period 140ms. |
| MAX435ESD | MAXIMIC | Wideband transconductance amplifier. 275MHz bandwidth, 450microA shutdown capability. |
| MAX6321HPUK45DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MX7543TQ | MAXIMIC | CMOS serial input 12 bit DAC. Error +1/2 LSB. |
| MAX4600EAE | MAXIMIC | 1.25om, dual SPST, CMOS analog switch. One NC (normally closed) and one NO (normally open) switch. |
| MAX4075BDEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 20V/V, noninverting gain 21V/V, -3dB BW 40kHZ. |
| MAX7413EPA | MAXIMIC | 5th-order, lowpass, switched-capacitor filter. Filter response bessel, operating voltage +3V |
| MAX3232EEWE | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX4174BDEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 20, 1+ (Rf/Dg) noninverting gain 21, -3dB BW 300kHz. |
| MAX6321HPUK36CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6319MHUK44A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1ms |
| MAX3387ECUG | MAXIMIC | 3.0V, +-15kV ESD-protected, autoshutdown plus RS-232 transceiver for PDAs and cell phohes. |
| ICL7663CPA | MAXIMIC | Programmable positive voltage regulator |
| MAX396CAI | MAXIMIC | Precision, 16-channel, low-voltage, CMOS analo0g multiplexer. |
| MAX734CSA | MAXIMIC | +12V, 120mA flash memory programming supply. |
| ICL7616BCSA | MAXIMIC | Single operational amplifier,5mV |
| MAX3664ESA | MAXIMIC | 622Mbps, ultra-low-power, 3.3V transimpedance preamplifier for SDH/SONET. |
| MAX467CWE | MAXIMIC | Two-channel, triple video buffer. Voltage gain 1V/V. |
| MAX4426EPA | MAXIMIC | Dual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range. |
| MAX4592CUE | MAXIMIC | High-speed, single-supply 12V, quad, SPST analog switches (four NO switches). |
| MAX409BCSA | MAXIMIC | 1.2microA max, single, single-supply op amp. |
| DG384ACJ | MAXIMIC | General purpose CMOS quad analog switch. |
| MAX6316LUK35DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MX7530LCWE | MAXIMIC | CMOS 10 bit multiplying D/A converter. Error 0.05% |
| MAX172AMRG | MAXIMIC | Complete 10 microsec. CMOS 12-bit ADC. Error +- 1/2 LSB. |
| MAX6315US31D2-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.08V. Reset timeout period(min) 20ms. |
| MXL1001CS8 | MAXIMIC | Precision operational amplifier |
| MX7574BG | MAXIMIC | Microprocessor compatible 8-bit A/D converter. Fast conversion time 15microsec. Error +-1/2 LSB. |
| MAX606ESA | MAXIMIC | Low-profile, 5V or 12V or adjustable, step-up converter for flach Memory/PCMCIA card. 1MHz switching frequency. |
| MAX6320PUK50DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
