| Parte No | Fabricante | Aplicación |
|---|
| MAX6316MUK46BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX514BENG | MaximIC | CMOS quad, 12-bit, serial-input multiplying DAC. DNL(LSBs) +-1. |
| MAX1715EEI | MaximIC | Ultra-high efficiency, dual step-down controller for notebook computers. |
| ICL7650C/D | MaximIC | Chopper-stabilized amplifier |
| MAX815NESA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.50V (max) 4.60V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit. |
| MAX6312UK50D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.875(min) 5.125(max). Nominal timeout period 140ms. |
| MAX702C/D | MaximIC | Power-supply monitor with reset. |
| MAX706TCPA | MaximIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 3.08V. Active-low reset output signal. |
| MXD1013C/D150 | MaximIC | 3-in-1 silicon delay line. Output delay 150ns. |
| MAX744ACWE | MaximIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. 159kHz to 212.5kHz guaranteed oscillator frequency limits. |
| MAX6319MHUK41A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1ms |
| MAX9687CSE | MaximIC | Dual, ultra-fast ECL-output comparator |
| MAX275ACPP | MaximIC | 4th-order continuous-time active filter |
| IH5051AC/D | MaximIC | CMOS analog switch. |
| MAX6307UK43D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.193(min),4.408(max).Nominal timeout period 1ms. |
| MAX6318LHUK46DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1.12sec,typ watchdog timeout 1.6sec |
| MAX349EWN | MaximIC | Serially controlled, low-voltage, 8-channel multiplexer |
| MAX1292BEEG | MaximIC | 400ksps, +5V, 4-channel, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1,-1 |
| MX536AKN | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX464EWI | MaximIC | Two-channel, quad RGB switch and buffer. Voltage gain 1V/V. |
| MAX6313UK27D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.633(min) 2.768(max).Nominal timeout period 1ms. |
| MX581KCSA | MaximIC | High precision 10 volt reference. Error +-10mV. |
| ICL7117CGL | MaximIC | 3 1/2 digit A/D converter with display hold |
| MAX192BMJP | MaximIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1. |
| MAX987ESA | MaximIC | Single, micropower, low-voltage, Rail-to-Rail I/O comparator. Push/pull output stage sinks and sources. |
| MXD1000UA175 | MaximIC | 5-tap silicon delay line |
| MAX6322HPUK45A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms |
| MAX313CPE | MaximIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6712MEXS-T10 | MaximIC | Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-high push-pull reset. |
| MAX640ESA | MaximIC | 3.3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
