| Parte No | Fabricante | Aplicación |
|---|
| MAX6320PUK27BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6320PUK40DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4219ESD | MaximIC | Triple, 230MHz -3dB bandwidth, single 3.3V/5.0V operation, gain of +2V/V or -1V/V, closed-loop, Rail-to-Rail buffer with enable. |
| MAX162CC/D | MaximIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1. |
| MAX520AEWE | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 1. |
| MAX6377UR25-T | MaximIC | Ultra-low-power voltage detector, 2.5V |
| MAX6309UK33D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.218(min),3.383(max) Nominal timeout period 1ms. |
| MAX6321HPUK36BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX1241AESA | MaximIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1/2 |
| MAX6318MHUK30CX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX263BCWI | MaximIC | Pin programmable univesal and bandpass filter. Accuracy 2%. |
| MAX6363PUT29-T | MaximIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 2.93V. Active-low open-drain reset. |
| MAX5159CPE | MaximIC | Low-power, dual, 10-bit voltage-output DAC with internal gain of +2V/V. +3V single-supply operation. |
| MAX8863TEUK-T | MaximIC | Low-dropout, 120mA linear regulator. Preset output voltage 3.15V |
| MAX4428EJA | MaximIC | Dual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range. |
| MAX6380UR43-T | MaximIC | Ultra-low-power voltage detector, 4.3V |
| MAX469CPE | MaximIC | Two-channel, triple video buffer. Voltage gain 2V/V. |
| MAX485EEPA | MaximIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Half-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX202ECPE | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MXD1005PD125 | MaximIC | 5-tap silicon delay line |
| MXD1005SE60 | MaximIC | 5-tap silicon delay line |
| MAX7410CPA | MaximIC | 5th-order, lowpass, switched-capacitor filter. Filter response butterworth, operating voltage +5V |
| MAX5154AEEE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1/2. |
| MXL1062CNB | MaximIC | 5th order, zero DC error, lowpass filter. |
| MAX351C/D | MaximIC | Precision, quad, SPST analog switch |
| MAX150AMJP | MaximIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1/2 LSB |
| MAX6316LUK27CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX941C/D | MaximIC | Single, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator |
| MAX703MJA | MaximIC | Low-cost microprocessor supervisory circuit with battery backup. Precison supply-voltage monitor 4.65V. |
| MAX512C/D | MaximIC | Low-cost, triple, 8-bit voltage-output DAC with serial interface. |
