| Parte No | Fabricante | Aplicación |
|---|
| MAX4582C/D | MaximIC | Low-voltage, CMOS analog multiplexer (two 4-channel). |
| MAX1673ESA | MaximIC | Regulated, 125mA-output, charge-pump DC-DC inverter |
| MAX6316MUK29CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX251ESD | MaximIC | +5V powered isolated RS-232 driver/receiver. |
| MAX859CSA | MaximIC | Adjustable-output, step-up DC-DC converter. Adjustable version 0.8V to 6.0V input voltage , output voltage 2.7V to6.0V range. |
| ICL7116C/D | MaximIC | 3 1/2 digit A/D converter with display hold |
| MAX1232C/D | MaximIC | Microprocessor monitor |
| MAX764C/D | MaximIC | -5V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX690AEPA | MaximIC | Microprocessor supervisory circuit. 4.65V precision supply-voltage monitor |
| MAX636AEJA | MaximIC | Preset -12V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX383EPE | MaximIC | Precision, low-voltage analog switch. |
| MAX6315US48D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.80V. Reset timeout period(min) 140ms. |
| MAX951EPA | MaximIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 1V/V. Supply current 7microA. |
| MAX6321HPUK43CX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6315US30D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.00V. Reset timeout period(min) 140ms. |
| MAX110ACPE | MaximIC | Low-cost, 2-channel, 14-bit serial ADC |
| MAX6355MTUT-T | MaximIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 3.08V (Vcc3). Active-low open-drain reset. |
| MAX182BMJI | MaximIC | Calibrated 4-channel 12-bit ADC with T/H and reference. |
| MAX6318LHUK41BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.100V min, reset timeout 20ms,typ watchdog timeout 102ms |
| MX7226KCWP | MaximIC | CMOS quad 8-bit D/A converter with separate input registers. Error +-2 LSB. |
| MAX6318LHUK33CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6317HUK30CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX1406CPE | MaximIC | +-15V, ESD-protected, EMC-compliant, 230kbps, 3-Tx/3-Rx RS-232 IC. |
| MAX8214BCSE | MaximIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Active pull-up outputs. |
| MAX4558CPE | MaximIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX6318MHUK30BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6307UK48D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.680(min),4.920(max).Nominal timeout period 1ms. |
| MAX6379XR41-T | MaximIC | Ultra-low-power voltage detector, 4.1V |
| MAX6320PUK31AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX110ACAP | MaximIC | Low-cost, 2-channel, 14-bit serial ADC. |
