| Parte No | Fabricante | Aplicación |
|---|
| MAX637AC/D | MaximIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX2620E/D | MaximIC | 10MHz to 1050MHz integrated RF oscillator with buffered outputs. |
| MAX162CCNG | MaximIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1 |
| MAX297EWE | MaximIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 50kHz |
| MAX194AEPE | MaximIC | 14-bit, 85ksps ADC with 10 microA shutdown |
| MAX981CSA | MaximIC | Ultra-low-power, open-drain, single comparator. Internal precision reference 2%. Internal hysteresis yes. |
| MAX157AEUA | MaximIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 0.5 |
| MAX803MEXR-T10 | MaximIC | Microprocessor reset circuit Reset threshold 4.38V. Open-drain active-low reset. 10k increments. |
| MAX4075BGEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 30V/V, noninverting gain 31V/V, -3dB BW 89kHZ. |
| MAX4075BCEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 15V/V, noninverting gain 16V/V, -3dB BW 54kHZ. |
| MAX8216EPD | MaximIC | +-5V, +-15V dedicated microprocessor voltage monitor. |
| MAX6320PUK32AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| ADC0820CCN | MaximIC | CMOS high speed 8-bit A/D converter with track/hold function. INL(LSB) +-1. |
| MAX643AESA | MaximIC | +15V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| IH5144CPE | MaximIC | Low power fast CMOS analog switch. Double pole, single throw (DPST). |
| DG408DY | MaximIC | Improved, 8-channel CMOS analog multiplexer |
| MAX389CWG | MaximIC | High-voltage, fault-protected analog multiplexer. 4-channel differential (2 of 8). |
| MAX4572CWI | MaximIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX772ESA | MaximIC | 15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX877MJA | MaximIC | Step-up/step-down DC-DC converters |
| MAX1204ACAP | MaximIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1/2 |
| MAX905EPD | MaximIC | Single, high-speed, positive edge-triggered, ECL-compatioble voltage comparator. |
| MAX6320PUK29CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,standard version (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6321HPUK45AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX262BCWG | MaximIC | Microprocessor programmable universal active filter. Accuracy 2%. |
| ICL7650IJA | MaximIC | Chopper-stabilized amplifier |
| MAX6320PUK36CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6501UKP115-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +115. |
| MAX369CPN | MaximIC | Fault-protected analog multiplexer with latch. 4 channel differential (2 of 8). |
| MXD1013PD025 | MaximIC | 3-in-1 silicon delay line. Output delay 25ns. |
