| Parte No | Fabricante | Aplicación |
|---|
| MAX6334UR21D2-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.1V, reset timeout(min) 20ms. |
| MAX6319MHUK38B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 20ms |
| MAX697EWE | MaximIC | Microprocessor supervisory circuit. Onboard gating of chip enable signals. |
| MAX4581CUE | MaximIC | Low-voltage, CMOS analog multiplexer (8-channel). |
| MAX4612CUD | MaximIC | Low-voltage, quad, SPST, CMOS analog switches (two NC and two NO switches). |
| MAX820TEJE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy +-2% |
| MAX6306UK33D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.218(min),3.383(max) Nominal timeout period 20ms. |
| MAX232EC/D | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6318LHUK40AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.000V min, reset timeout 1ms,typ watchdog timeout 1.6ms |
| MAX6321HPUK44CX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX178BCNG | MaximIC | Calibrated 12-bit ADC with T/H and reference. |
| MAX197BCAI | MaximIC | Multi-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface |
| MXD1013C/D010 | MaximIC | 3-in-1 silicon delay line. Output delay 10ns. |
| MAX488EESA | MaximIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Full-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - no. Receiver/driver enable - no. Quiescent current - 120 microA. Number of transmitter on bus - 32. |
| MAX6316MUK37AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX856MJA | MaximIC | 3.3V or 5V output, step-up DC-DC converter. |
| MAX6320PUK31DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX459CPL | MaximIC | 8 x 4 video crosspoint switch with buffers |
| MAX917EUK-T | MaximIC | 1.8V, nanopower 750nA, Beyond-the-Rails comparator. Internal 1.245V+-1.5% reference. CMOS push/pull output with +-8mA drive capability. |
| MAX6315US50D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 5.00V. Reset timeout period(min) 20ms. |
| MAX6337US16D1-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 1.6V, reset timeout(min) 1ms. |
| MAX404CSA | MaximIC | Video operational amplifier. |
| MAX6312UK50D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.875(min) 5.125(max). Nominal timeout period 1120ms. |
| MAX5839ACMN | MaximIC | Octal, 13-bit voltage-outpur DAC with parallel nterface. INL(LSB) +-2. |
| MAX6334UR25D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.5V, reset timeout(min) 1ms. |
| MAX6316MUK45AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6318LHUK46AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1ms,typ watchdog timeout 102ms |
| MAX6309UK43D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.193(min),4.408(max) Nominal timeout period 1120ms. |
| MAX6307UK35D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.413(min),3.588(max).Nominal timeout period 140ms. |
| MAX508BCWP | MaximIC | Voltage-output, 12-bit DAC with internal reference. 8+4 data-bus widths. Error +-3/4. |
