| Parte No | Fabricante | Aplicación |
|---|
| MX7581CQ | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 1/2 LSB. |
| MAX6320PUK41BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX189BEWE | MaximIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1. |
| MAX6318LHUK49CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 140ms, typ watchdog timeout 102ms |
| DG406AK | MaximIC | Improved, 16-channel CMOS analog multiplexer |
| MAX6104EUR-T | MaximIC | Low-cost, micropower, low-dropout, high-output-current, SOT23 voltage reference. Output voltage 4.096V, input voltage range (Vout + 200mV)V to 12.6V to 12.6V. |
| MAX361EJE | MaximIC | Precision, quad, SPST analog switch. |
| MAX543AMJA | MaximIC | CMOS, 12-bit, serial-input multiplying DAC. Linearity (LSB) +-1/2 |
| MAX1242ACSA | MaximIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1/2 |
| MAX156BENG | MaximIC | 4-channel ADC with simultaneous T/Hs and reference. Error +-1 LSB. |
| MAX6315US38D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.80V. Reset timeout period(min) 140ms. |
| MAX4360EAX | MaximIC | Low-cost 8x4 video crosspoint switch. 65MHz -3dB bandwidth. |
| MAX526CENG | MaximIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 3micros. |
| MAX6316LUK42DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| DG301ACK | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX296C/D | MaximIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX6318MHUK35CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6318MHUK50BY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX5352BEPA | MaximIC | Low-power, 12-bit voltage-output DAC with serial interface. INL (LSB) +-1. +5V single-supply operation. |
| ICL7665ACSA | MaximIC | Microprocessor voltage monitor with dual overvoltage and undervoltage detection |
| MAX704ESA | MaximIC | Low-cost microprocessor supervisory circuit with battery backup. Precison supply-voltage monitor 4.40V. |
| MAX5156BCPE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +5V single-supply operation. INL(LSB) +-1. |
| MXL1001CJ8 | MaximIC | Precision operational amplifier |
| MAX6312UK29D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.857(min) 3.000(max). Nominal timeout period 20ms. |
| MAX744AMJA | MaximIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. 159kHz to 212.5kHz guaranteed oscillator frequency limits. |
| MAX162BMRG | MaximIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1. |
| MAX6321HPUK27AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX3761E/D | MaximIC | Low-power, 622Mbps limiting amplifier with chatter-free power detect for LANs. |
| MX7824LN | MaximIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX6322HPUK32D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1120ms |
