| Parte No | Fabricante | Aplicación |
|---|
| MAX6315US27D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.70V. Reset timeout period(min) 140ms. |
| MAX6317HUK39CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6318LHUK36BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.600V min, reset timeout 20ms,typ watchdog timeout 1.6sec |
| MAX6317HUK48DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX6313UK32D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.120(min) 3.280(max).Nominal timeout period 140ms. |
| MAX6319LHUK40C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms |
| DG306CWE | MaximIC | CMOS dual and quad analog switch. |
| MAX262BCNG | MaximIC | Microprocessor programmable universal active filter. Accuracy 2%. |
| MAX4117ESA | MaximIC | Dual, 400MHz -3dB bandwidth, low-power, current feedback amplifier. |
| MAX7234BFIPL | MaximIC | Triplexed LCD decoder/driver (5 alphanumeric characters/18 segments; serial input format). |
| MAX809JEXR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 4.00V. Push-pull active-high reset. 10k increments. |
| MAX6306UK32D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 140ms. |
| MAX6318LHUK42DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.200V min, reset timeout 1.12sec,typ watchdog timeout 102ms |
| MAX791MJE | MaximIC | Microprocessor supervisory circuit |
| MAX8215MJD | MaximIC | +-5V, +-12V dedicated microprocessor voltage monitor. |
| DG307ACJ | MaximIC | CMOS dual and quad analog switch. |
| DG200ABA | MaximIC | Dual monolithic SPST CMOS analog swith |
| MAX6306UK43D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.193(min),4.408(max) Nominal timeout period 140ms. |
| MAX4168EUD | MaximIC | Dual, high-output-drive, precision, low-power, single-supply +2.7V to +6.5V, Rail-to-Rail I/O op amp with swhutdown. |
| MAX1108CUB | MaximIC | Single-supply, low-power, 2-channel, serial 8-bit ADC |
| MAX295MJA | MaximIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX7480EPA | MaximIC | 8th-order, lowpass, butterworth, switched-capacitor filter |
| MAX194AMDE | MaximIC | 14-bit, 85ksps ADC with 10 microA shutdown |
| MAX8868EUK32-T | MaximIC | Low-noise, low-dropout, 150mA linear regulator with auto discharge function. Preset output voltage 3.15V |
| MAX548AEPA | MaximIC | +2.5V to +5.5V, low-power, dual 8-bit voltage-output DAC with an asynchronous load input; it uses Vdd as the reference input. . |
| MXD1000PA175 | MaximIC | 5-tap silicon delay line |
| MAX452EPA | MaximIC | CMOS unity-gain stable, 50MHz video amplifier. |
| MAX975EUA | MaximIC | Single, +3V and +5V dual-speed comparator with auto-standby. . |
| MAX6328UR27-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.700V. Order increment 10k |
| MAX6318MHUK30AY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
