Path:okDatasheet > Datasheet Semiconductor > MaximIC Datasheet > MaximIC-189

E MAX2682EUA-T MAX9686C/D MAX923MJA MAX6306UK36D3-T MAX1201EMH MAX633AEJA MAX695CWE MAX4322ESA MAX6316LUK39BX-T MAX4193C/D MAX544ACPA MAX405ESA MAX3669E/D MAX364CPE MAX4514ESA MAX4546CEE MAX724ECK MAX4266ESA ICM7240IPE MAX232MJE MAX663CSA MX7535SD MAX6313UK36D4-T MAX6316MUK25DZ-T

MaximIC Catálogo de datos-189

Parte NoFabricanteAplicación
MAX4632EPE MaximICFault-protected, high-voltage, dual analog switch (two NO/NC SPDT switches). Fault protection +-40V with power off, +-25V with +-15V supplies.
MAX3095CEE MaximIC+-15kV ESD-Protected, 10Mbps, 3V quad RS-422/RS-485 receiver.
MAX2682EUA-T MaximIC400MHz to 2.5GHz, low-noise, SiGe downconverter mixer.
MAX9686C/D MaximICSingle very fast TTL output comparator
MAX923MJA MaximICDual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis.
MAX6306UK36D3-T MaximICMultiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.510(min),3.690(max) Nominal timeout period 140ms.
MAX1201EMH MaximIC+5V single-supply, 2.2Msps, 14-bit self-calibrating ADC
MAX633AEJA MaximICCMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy.
MAX695CWE MaximICMicroprocessor supervisory circuit.
MAX4322ESA MaximICSingle, low-cost, low-power, Rail-to-Rail I/O op amp. BW 5MHz
MAX6316LUK39BX-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 102ms
MAX4193C/D MaximICCMOS micropower step-up switching regulator
MAX544ACPA MaximIC+5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1/2
MAX405ESA MaximICPrecision video buffer amplifier.
MAX3669E/D MaximIC+3.3V, 622Mbps, SDH/SONET laser driver with current monitors and APC.
MAX364CPE MaximICPrecision, quad, SPST, normally closed (NC) analog switch.
MAX4514ESA MaximICLow-voltage, low-on-resistance, SPST, CMOS analog switch. Normally open (NO), +2V to +12V single-supply operation.
MAX4546CEE MaximICDual,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems.
MAX724ECK MaximIC5A step-down, PWM, switch-mode DC-DC regulator.
MAX4266ESA MaximICSingle, ultra-low-distortion, single-supply, 350MHz op apm with enable. Min gain 2V/V, single-supply operation +4.5V to +8.0V
ICM7240IPE MaximICProgrammable timer/counter
MAX232MJE MaximIC+5V-powered, multichannel RS-232 driver-receiver.
MAX663CSA MaximICDual Mode 5V or programmable micropower voltage positive regulator.
MX7535SD MaximICMicroprocessor-compatible, 14-bit DAC. INL +-2 LSB.
MAX6313UK36D4-T MaximICMultiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.510(min) 3.690(max).Nominal timeout period 1120ms.
MAX6316MUK25DZ-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec
DG303ACK MaximICQuad, TTL compatible CMOS analog switch.
MAX318CSA MaximICPrecision, CMOS analog switch
MAX6318LHUK38BW-T MaximICMicroprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 20ms,typ watchdog timeout 6.3ms
MAX475EPD MaximICQuad, 10MHz single-supply op amp.

<< 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 >>