| Parte No | Fabricante | Aplicación |
|---|
| MAX6316MUK30AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MX7507JQ | MaximIC | Differential, 8 channel (2 of 16) monolithic CMOS analog multiplexer. |
| MAX746MJE | MaximIC | High-efficiency, PWM, step-down, N-channel DC-DC controller |
| MAX485MJA | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX6317HUK30CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX4566CEE | MaximIC | Two dual SPST switches, low-voltage, bidirectional RF/video switch. |
| MAX6334UR19D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.9V, reset timeout(min) 100ms. |
| MAX125AEAX | MaximIC | 2x4-channel, simultaneous-sampling 14-bit DAS. INL (LSB) +2,-2 |
| MAX6307UK50D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.875(min),5.125(max).Nominal timeout period 1120ms. |
| MXD1013C/D015 | MaximIC | 3-in-1 silicon delay line. Output delay 15ns. |
| MAX4275CAEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 100, 1+ (Rf/Dg) noninverting gain 101, -3dB BW 230kHz. |
| MAX7645AMJP | MaximIC | TTL/CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-1 LSB. |
| MXD1000UA20 | MaximIC | 5-tap silicon delay line |
| IH5143CWE | MaximIC | Low power fast CMOS analog switch. Dual, single pole, doube throw (Dual SPDT). |
| MAX318MJA | MaximIC | Precision, CMOS analog switch |
| MAX563C/D | MaximIC | +3.3V-powered, EIA/TIA-562 dual tranceiver with receivers active in shutdown. |
| MAX819MCUA | MaximIC | +5V microprocessor supervisory circuit. Reset threshold 4.40V, active-low reset, backup-battery switchover, power-fail comparator, battery freshness seal, manual reset input. |
| MAX185BEWG | MaximIC | High-speed 12-bit A/D converter with external reference input. 10 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX797CSE | MaximIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Logic-controlled low-noise mode. |
| ADC0820CCJ | MaximIC | CMOS high speed 8-bit A/D converter with track/hold function. INL(LSB) +-1. |
| MAX6502CMP095-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +95. |
| MAX6316LUK46BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4624EUT-T | MaximIC | 1om max(+5V supply), 2om max(+3V supply) low-voltage, single-supply(+1.8V to +5.5V) operation, SPDT analog switch. Break-before-make switching. |
| MAX3483CSA | MaximIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0.25Mbps. Supply voltage 3.0V to 3.6V |
| MAX6314US49D2-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.90V. Reset timeout period(min) 20ms. |
| MAX613CPD | MaximIC | Dual-slot PCMCIA analog power controller. |
| MAX9042BEUA | MaximIC | Micropower, single-supply operation +2.5V to 5.5V, dual comparator + precision reference IC. |
| MAX4174BFEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 25, 1+ (Rf/Dg) noninverting gain 26, -3dB BW 580kHz. |
| MAX3693ECJ | MaximIC | +3.3V, 622Mbps, SDH/SONET 41 serializer with clock synthesis and LVDS inputs. |
| MAX6319LHUK32B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms |
