| Parte No | Fabricante | Aplicación |
|---|
| MAX793TEPE | MaximIC | Microprocessor supervisory circuit. Reset threshold 3.00V to 3.15V. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Battery OK output.Watchdog input.Manual reset inp. |
| MAX6316MUK39AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6306UK38D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.705(min),3.895(max) Nominal timeout period 1ms. |
| MAX6316LUK35CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,resey output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX809SEUR-T | MaximIC | Microprocessor reset circuit. Reset threshold 2.93V. Push-pull active-high reset. 2.5k increments. |
| MAX6322HPUK31D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1120ms |
| MAX3245ECAI | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX6316LUK25AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MX7828KCAI | MaximIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1 |
| MAX274BEWI | MaximIC | 8th-order continuous-time active filter |
| MAX6310UK43D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.193(min),4.408(max). Nominal timeout period 1120ms. |
| MAX155AEPI | MaximIC | 8-channel ADC with simultaneous T/Hs and reference. Error +-1/2 LSB. |
| MAX6316LUK39BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6318MHUK42BY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX190ACWG | MaximIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX4566EPE | MaximIC | Two dual SPST switches, low-voltage, bidirectional RF/video switch. |
| DG403C/D | MaximIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MAX766EPA | MaximIC | -15V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX4515MJA | MaximIC | Low-voltage, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC), +2V to +12V single-supply operation. |
| MAX6316MUK43AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| ICL7611ACSA | MaximIC | Single operational amplifier, 2mV |
| MAX864C/D | MaximIC | Dual-output charge pump with shutdown |
| MAX5159CEE | MaximIC | Low-power, dual, 10-bit voltage-output DAC with internal gain of +2V/V. +3V single-supply operation. |
| MAX6315US26D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.63V. Reset timeout period(min) 1120ms. |
| MAX6316LUK33AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX635AEPA | MaximIC | Preset -5V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX186ACAP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX868C/D | MaximIC | Regulated, adjustable -2x inverting charge pump |
| MAX737EWE | MaximIC | -15V, inverting carrent-mode PWM regulator. |
| MAX1642C/D | MaximIC | High-efficiency, step-up DC-DC converter for 1V inputs |
