| Parte No | Fabricante | Aplicación |
|---|
| MAX761CSA | MaximIC | 12V or adjustable, high-efficiency, low Iq, step-up DC-DC converter. |
| MAX4051CEE | MaximIC | Low-voltage, CMOS analog multiplexer |
| MAX543ACWE | MaximIC | CMOS, 12-bit, serial-input multiplying DAC. Linearity (LSB) +-1/2 |
| MAX1293AEEG | MaximIC | 250ksps, +3V, 4-channel single-ended/2channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5,-0.5 |
| MXL1178CN8 | MaximIC | 17microA max, dual, single-supply precision operational amplifier. |
| MX7503C/D | MaximIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX907C/D | MaximIC | Single high-speed, ultra low-power, single 4.4V to 5.5V supply operation TTL comparator. |
| MAX974ESE | MaximIC | Ultra-low-power, open-drain, quad comparator. Internal precision reference 1%. Internal hysteresis no. |
| MAX6712REXS-T | MaximIC | Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-high push-pull reset. |
| MAX389CJN | MaximIC | High-voltage, fault-protected analog multiplexer. 4-channel differential (2 of 8). |
| MXD1013SE075 | MaximIC | 3-in-1 silicon delay line. Output delay 75ns. |
| MAX4547CEE | MaximIC | Single,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX6326UR27-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.700V. Order increment 10k |
| REF02DSA | MaximIC | +5V precisioon voltage reference. Max TEMPCO 250ppm/degC. Initial error +-100mV |
| MAX4506EPA | MaximIC | Fault-protected, high-voltage, signal-line protector |
| MAX6316LUK37CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MXD1005UA125 | MaximIC | 5-tap silicon delay line |
| MAX6317HUK35BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4506ESA | MaximIC | Fault-protected, high-voltage, signal-line protector |
| MX7536SQ | MaximIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-2 LSB. |
| ICL7632BCSE | MaximIC | Triple operational amplifier, 5mV |
| MAX452EJA | MaximIC | CMOS unity-gain stable, 50MHz video amplifier. |
| MAX531BEPD | MaximIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. Internal 2.048V reference. Flexible output ranges 0V to Vdd, Vss to Vdd, 0V to 2.6V. |
| MAX6318LHUK38AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.800V min, reset timeout 1ms,typ watchdog timeout 6.3ms |
| MAX6319MHUK44D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1120ms |
| MAX349MJN | MaximIC | Serially controlled, low-voltage, 8-channel multiplexer |
| MAX4420C/D | MaximIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
| MAX466CNI | MaximIC | Two-channel, quad RGB switch and buffer. Voltage gain 2V/V. |
| MAX954C/D | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 10V/V. Supply current 5microA. |
| MAX3130CAI | MaximIC | 3V to 5.5V, IrDA infrared transceiver with integrated RS-232 interface. |
