| Parte No | Fabricante | Aplicación |
|---|
| MAX693CWE | MaximIC | Microprocessor supervisory circuit. |
| MAX6318LHUK37AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.700V min, reset timeout 1ms,typ watchdog timeout 1.6sec |
| MAX6309UK41D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.998(min),4.203(max) Nominal timeout period 1ms. |
| MX7528BQ | MaximIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX195BCWE | MaximIC | 16-bit, 85ksps ADC with 10 microA shutdown |
| MAX6332UR17D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 100ms. |
| MAX667MJA | MaximIC | +5v/programmable low-dropout voltage regulator |
| MAX6502UKP115-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +115. |
| MAX500BC/D | MaximIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-2. |
| MX536ASQ | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX6314US40D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 1ms. |
| MAX6316LUK42DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX603CSA | MaximIC | 5V or adjustable, low-dropout, low quiescent currrent, 500mA linear regulator. |
| MAX1259EPE | MaximIC | Battery manager |
| MAX802SESA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| IH5044C/D | MaximIC | General-purpose CMOS analog switch. Double pole, single throw (DPST) |
| MAX6241BESA | MaximIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 7.0. |
| MAX520BCPE | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX706MJA | MaximIC | Low-cost, microprocessor supervisory circuit. Active-low manual reset input. Independent watchdog timer - 1.6s timeout. Precision supply-voltage monitor 4.4V. |
| MAX6320PUK32AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX262ACWG | MaximIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MX7845AQ | MaximIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX708RCPA | MaximIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.63V. Active-low and active-high reset output signal. |
| MAX3232CSE | MaximIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| MAX525BEPP | MaximIC | Low-power, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX3243CAI | MaximIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX873BC/D | MaximIC | Low-power, low-drift precision voltage reference. 2.5V+-2.5mV output (Ta=25gradC). TEMPCO(max) 20ppm/gradC. |
| MXD1000PA500 | MaximIC | 5-tap silicon delay line |
| MAX6190AESA | MaximIC | Precision, micropower, low-dropout voltage reference. Output voltage 1.250V, initial accuracy +-2, temperature coefficient <5ppm. |
| MAX971CPA | MaximIC | Ultra-low-power, open-drain, single comparator. Internal precision reference 1%. Internal hysteresis yes. |
