| Parte No | Fabricante | Aplicación |
|---|
| DG408DK | MaximIC | Improved, 8-channel CMOS analog multiplexer |
| MAX6320PUK31CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MXD1000PA60 | MaximIC | 5-tap silicon delay line |
| MAX6318MHUK29CX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6318MHUK40CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6314US44D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.39V. Reset timeout period(min) 1ms. |
| MAX3317EEUP | MaximIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX530BCAG | MaximIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1. |
| MAX4074ADESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 1V/V, noninverting gain 2V/V, -3dB BW 102kHZ. |
| MAX253C/D | MaximIC | Transformer driver for isolated RS-485 interface. |
| MAX6379XR43-T | MaximIC | Ultra-low-power voltage detector, 4.3V |
| MAX6322HPUK34A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms |
| MAX6320PUK45DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MXD1210CWE | MaximIC | Nonvolatile RAM controller |
| MAX516ACNG | MaximIC | Quad comparator with programmable threshold. Error (LSB) +-1 |
| MAX667CPA | MaximIC | +5V/programmable low-dropout voltage regulator |
| MAX6310UK50D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.875(min),5.125(max). Nominal timeout period 140ms. |
| MAX3232EPE | MaximIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| MAX1297BEEG | MaximIC | 265ksps, +3V, 2-channel single-ended/1-channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1, -1 |
| MAX2424EAI | MaximIC | 900 MHz image-reject receiver with transmit mixer. |
| MAX6347UR33-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.300V. Order increment 10k |
| MX7528JCWP | MaximIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1 LSB. |
| MAX6241BCPA | MaximIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX694CPA | MaximIC | Microprocessor supervisory circuit. |
| MAX4429CSA | MaximIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
| MAX5152AEPE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +5V single-supply operation. INL(LSB) +-1/2. |
| MX674ATQ | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 3/4. TEMPCO(ppm/C) 25. |
| MAX4504CSA | MaximIC | Low-voltage, dual-supply, SPST, CMOS analog switch. |
| MAX642BCPA | MaximIC | +12V fixed output, 10W CMOS step-up switching regulator. 10% output accuracy |
| DG306ACK | MaximIC | CMOS dual and quad analog switch. |
