| Parte No | Fabricante | Aplicación |
|---|
| MAX700CPA | MaximIC | Power-supply monitor with reset. |
| MAX382EJN | MaximIC | Low-voltage, 8-channel multiplexer with latchable inputs. |
| MAX913MJA | MaximIC | Dual, ultra-fast(10ns), low-power, precision TTL comparator. |
| MAX4274BMESA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 80, 1+ (Rf/Dg) noninverting gain 81, -3dB BW 260kHz. |
| MAX6321HPUK40CX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MXD1000UA125 | MaximIC | 5-tap silicon delay line |
| MAX6309UK37D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max) Nominal timeout period 140ms. |
| MX7847C/D | MaximIC | Complete, dual, 12-bit multiplying DAC. 12-bit parallel interface. Error (LSB) +-1 |
| MAX3095EEE | MaximIC | +-15kV ESD-Protected, 10Mbps, 3V quad RS-422/RS-485 receiver. |
| MAX6312UK29D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.857(min) 3.000(max). Nominal timeout period 1ms. |
| MAX8863SEUK-T | MaximIC | Low-dropout, 120mA linear regulator. Preset output voltage 2.84V |
| MAX693MJE | MaximIC | Microprocessor supervisory circuit. |
| MXD1000PA150 | MaximIC | 5-tap silicon delay line |
| MAX6318LHUK27AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6320PUK34DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX208C/D | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX111BCPE | MaximIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX164BENG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX202ECSE | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX145ACUA | MaximIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-0.5 |
| MAX230CPP | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX1543ETP | MaximIC | TFT LCD DC-to-DC converter with operational amplifiers |
| MAX120CWG | MaximIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +1 |
| MXD1000SE30 | MaximIC | 5-tap silicon delay line |
| MAX6317HUK30DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX4074BGESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 30V/V, noninverting gain 31V/V, -3dB BW 89kHZ. |
| MAX4051ACEE | MaximIC | Low-voltage, CMOS analog multiplexer |
| MAX9698CJE | MaximIC | Single very fast TTL output comparator |
| MAX5155ACEE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-1. |
| MAX6317HUK35AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
