| Parte No | Fabricante | Aplicación |
|---|
| MAX4583CPE | MaximIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX3486CPA | MaximIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 2.5Mbps. Supply voltage 3.0V to 3.6V |
| MAX5122AEEE | MaximIC | +5V, 12-bit, serial, force/sense DAC with 10ppm/C internal reference +2.5V. INL (LSB) +-0.5. |
| MAX6312UK27D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.633(min) 2.768(max). Nominal timeout period 1120ms. |
| MAX549AEUA | MaximIC | +2.5V to +5.5V, low-power, dual, 8-bit voltage-output DAC with an external reference input. |
| MAX1480CCPI | MaximIC | Complete, isolated RS-485/RS-422 data inteface. |
| ICL7611DCSA | MaximIC | Single operational amplifier, 15mV |
| MAX6346XR38-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.800V. Order increment 10k |
| MAX3131EAI | MaximIC | 3V to 5.5V, IrDA infrared transceiver with integrated RS-232 interface. |
| MAX792TC/D | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V |
| MX7820TQ | MaximIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1 LSB |
| MAX6318MHUK42CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6335US25D2-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 2.5V, reset timeout(min) 20ms. |
| MAX6316MUK50BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX4053MJE | MaximIC | Low-voltage, CMOS analog switch |
| MAX6306UK31D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.003(min),3.157(max) Nominal timeout period 140ms. |
| MAX952C/D | MaximIC | Ultra low-power, single-supply Op Amp + comparator + reference. Internal 1.2V+-2% bandgap reference. Op Amp gain stability 10V/V. Supply current 7microA. |
| MAX266ACPI | MaximIC | Pin and resistor programmed universal active filter. Accyracy 1% |
| MAX156ACWI | MaximIC | 4-channel ADC with simultaneous T/Hs and reference. Error +-1/2 LSB. |
| MAX6380XR40-T | MaximIC | Ultra-low-power voltage detector, 4.0V |
| MAX971MJA | MaximIC | Ultra-low-power, open-drain, single comparator. Internal precision reference 1%. Internal hysteresis yes. |
| MAX6306UK42D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.095(min),4.305(max) Nominal timeout period 1ms. |
| MAX6317HUK40CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX757C/D | MaximIC | 3.3V to 5V adjustable-output, step-up DC-DC converter. |
| MAX823LEUK | MaximIC | Microprocessor supervisory circuit. Reset threshold 4.63V. Active-low reset. Watchdog input. Manual reset input. |
| MAX189BCPA | MaximIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1. |
| MAX4166ESA | MaximIC | Single, high-output-drive, precision, low-power, single-supply +2.7V to +6.5V, Rail-to-Rail I/O op amp with shutdown. |
| MAX1204ACPP | MaximIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1/2 |
| MAX6045BEUR-T | MaximIC | Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 4.500V, input voltage (Vout + 200mV)V to 12.6V. |
| MAX4331ESA | MaximIC | Single, low-power, single-supply, Rail-to-Rail I/O op amp with shutdown. |
