| Parte No | Fabricante | Aplicación |
|---|
| MAX764CSA | MaximIC | -5V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX651ESA | MaximIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX6241AMJA | MaximIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX4631ESE | MaximIC | Fault-protected, high-voltage, dual analog switch (two NO SPST switches). Fault protection +-40V with power off, +-36V with +-15V supplies. |
| MAX510ACPE | MaximIC | Quad, serial 8-bit DAC with Rail-to-Rail output. TUE (LSB) +-1 |
| MAX891LEUA-T | MaximIC | Current-limited 500mA, high-side P-channel switch with thermal shutdown. On-resistance 0.12omega |
| MAX6379UR44-T | MaximIC | Ultra-low-power voltage detector, 4.4V |
| MAX6317HUK46BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX3491ECPD | MaximIC | 3.3V-powered, +-15kV ESD-protected, 15Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 12Mbps. Supply voltage 3.0V to 3.6V |
| MAX6335US23D1-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 2.3V, reset timeout(min) 1ms. |
| MAX810SEUR-T | MaximIC | Microprocessor reset circuit. Reset threshold 2.93V. Push-pull active-high reset. 2.5k increments. |
| MAX4588EAI | MaximIC | Low-voltage, high-isolation, dual 4-channel RF and video multiplexer. |
| MAX6316MUK47CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX5157BCEE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +3V single-supply operation. INL(LSB) +-2. |
| MAX674MTV | MaximIC | +10V precision voltage reference. Temp. coefficient ppm/degC 20. Initial error 15mV |
| MXD1013UA015 | MaximIC | 3-in-1 silicon delay line. Output delay 15ns. |
| MAX6321HPUK44BX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| ICL8069CCSQ2 | MaximIC | Low-voltage reference, 50 ppm/C - max temp. coefficient. |
| MAX6313UK40D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.900(min) 4.100(max).Nominal timeout period 1120ms. |
| MAX3085CSA | MaximIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6312UK31D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.003(min) 3.157(max). Nominal timeout period 1120ms. |
| MAX6316MUK43BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 20ms, typ watchdog timeout 102ms |
| ICL7107CPL | MaximIC | 3 1/2 digit a/d converter |
| DG409DK | MaximIC | Improved, dual 4-channel, CMOS analog multiplexer |
| MX7538TD | MaximIC | Microprocessor compatible CMOS, 14-bit D/A converter. Error +-1 LSB. |
| MAX6504UKN025-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -25. |
| MAX6321HPUK37AW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX1642EUA | MaximIC | High-efficiency, step-up DC-DC converter for 1V inputs |
| MX7672LN05 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-1/2 LSB. |
| MAX6316MUK49AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
