| Parte No | Fabricante | Aplicación |
|---|
| MAX6318LHUK49DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| ICL7135CPI | MaximIC | 4-1/2 digit A/D converter with multiplexed BCD outputs |
| MAX6307UK28D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.730(min),2.870(max).Nominal timeout period 20ms. |
| MAX6316LUK27BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX500BCPE | MaximIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-2. |
| MAX4613ESE | MaximIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
| MAX4570EWI | MaximIC | Serrially controlled, dual 4x2, clickless audio/video crosspoint switches. |
| MAX6316LUK47CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6316MUK27DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MXD1013PD015 | MaximIC | 3-in-1 silicon delay line. Output delay 15ns. |
| MAX6321HPUK30CY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX161CC/D | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 1 7/8 LSB |
| MX565ATD | MaximIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/4LSB |
| MX7548J/D | MaximIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1 LSB. |
| MAX3232ECPE | MaximIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6375XR24-T | MaximIC | Ultra-low-power voltage detector, 2.4V |
| MAX6318MHUK27AW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6354MRUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.63V (Vcc3). Active-low push-pull reset 3V. |
| MAX808MCSA | MaximIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. CMOS RAM write protection.. |
| MAX1125BIDO | MaximIC | 8-bit,300 Msps flash ADC |
| MAX211EEWI | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6333UR18D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.8V, reset timeout(min) 100ms. Standard version |
| MAX4537C/D | MaximIC | Quad, low-voltage, SPST analog switches with enable. 4 NC. |
| MAX208ECAG | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX810LEXR-T | MaximIC | Microprocessor reset circuit. Reset threshold 4.63V. Push-pull active-high reset. 2.5k increments. |
| MAX8211CTY | MaximIC | Microprocessor voltage monitor with programmable voltage detection. Define output current limit. |
| MAX6318LHUK34CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX108CHC | MaximIC | 5V, 1.5Gsps, 8-bit ADC with on-chip 2.2GHz track/hold amplifier |
| ICL7631CCJE | MaximIC | Triple operational amplifier, 10mV |
| MAX6317HUK26BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
